SY-SCKMPN-3000

SY-SCKMPN-3000-1

Kama-Panel 3

Model Name:
Kama-Panel 3

Model-No.:

SY-SCKMPN-3000

Dimensions:

148.5×42.5×117.5 mm | 5.85×1.67×4.63 in (WxHxD)

Compatibility:
USB 2.0 and Multi-format Card Reader / Writer
Direct slots for MicroSD/MicroSDHC Card, Memory Stick Micro, SD, Memory Stick, Multi Media Card.
MiniSD/MiniSDHC, RS-MMC, MMC-micro support by Adaptor (not included)
2 Ports for USB / Power e-SATA

Voltage Range:
3,7 V (±10%) – 12 V (±10%)

Fan Output Current:
Max 1 A (1 Channel)

Fan Speed Range:
0 – 9,900 rpm

Weight:
205 g / 7.23 oz

Accessory:
Fan Cable (x2), Audio Cable, S-ATA Cable (x3), USB Cable, Power Cable, Sensor Cable (x2), Power Switch Cabel Connector,  Reset Switch Cable Connector, Installation Screws (x4)

5.25“ Multi-Panel

Fan Controller :
2-channel fan controller with LCD, displaying temperature / fan speed
Temperature alert: between 40 and 90 °C in steps of 1 °C
When temperature exceeds the set value: The temperature displayed will flash and set an alarm. The alarm can be muted by pressing “MODE” button.
When the fan RPM cannot be recognized:The RPM displayed will flash and set the alarm. The alarm can be muted by pressing “MODE” button.
Retractable Fan Controller Knob makes the Kama-Panel 3 suitable for use in PC-Cases with a door panel.

USB 2.0 and Multi-format Card Reader / Writer
Direct slots for MicroSD/MicroSDHC Card, Memory Stick Micro, SD, Memory Stick, Multi Media Card.
MiniSD/MiniSDHC, RS-MMC, MMC-micro support by Adaptor (not included)
2 Ports for USB / Power e-SATA

PC-Connections :
PC linkable Power and Reset Switch
Can establish relay connections with the PC case’s power switch and reset switch. This allows the PC case switch to be accessible while the power and reset switch of this product is connected.
Either switch can be freely used depending on situations for your convenience.

2.5 inch drive Mobile Rack function :
This device is compatible to 2.5 inch drives with 9.5mm thickness.

Complies to RoHS standard

Caution:
Please avoid placing the sensor in between the CPU and CPU cooler.
Placing the sensor between the CPU and CPU cooler leads to reduced cooling efficiency and can harm your CPU as well as electrical parts of the sensor.

This entry was posted in Accessories, Products, Special Items. Bookmark the permalink.